Feturing a sophisticated yet reliable build. The ELS LPC9 consists of the highest quality grade LED' and construction materials built to outlast and overperform most LED grow lighting on the market today. 
 
 
Only the highest-grade materials and components are used in ELS Canada Lighting's LED fixtures. Delivering safe, dependable light ELS Canada Lighting fixtures consists of industry leading performance. By perfectiong a high quality, full spectrum light with highest intensity PPFD delivered through a multi-bar, Linear design. ELS Canada Lighting creates the ultimate ceiling of light for the entire plant's growth cycle, making these LEDs the smartest option for a higher and faster return on investment.
 
Producing extremely high levels of PPF output of 2925 µmol/s and a Photon Efficacy (fixture efficiency) of 2.9 µmol/J, XT 960W ELS-LPC9 LED creates a homogeneous light spread at close distance from the crop canopy, resulting in outstanding results when used in 5’x5’ coverage indoor grow areas with Supplemental CO2 use.
 
Suggestions:
The use of CO2 with this unit is not imperative, but if you choose to run it without it, then we recommend a longer canopy distance to the fixture, ensuring the optimal PPFD levels recommended to the grow stage. Utilizing this last method the expected coverage area gets to 6’x6’ but with lower levels of PPFD intensity concentration.
 
NOTE: 
Supplementation use of Carbon Dioxide (CO2) in your controlled environment can significantly improve the yield of your crop if used correctly. A good rule is that once you exceed 1000 µmol/s/m2 PPFD levels, you should be 1:1 with CO2 PPM – up to 1500. So at max PPFD = 1500 µmol/s/m2, CO2 would be 1500 PPM (a little lower, 1400 PPM may be the safest to start).
When compared to regular similar wattage High Pressure Sodium solutions theLPC9W LED can achieve 30-40% less HVAC capacity and increased yields of up to 30-60%.
The LPC9 960W LED is built using high quality and durable drivers and top shelf LEDs and Lumileds generating an optimized full-spectrum light source ideal for veg and flowering applications.
 
The LPC9W LED is designed with both vegetative and flowering growth periods in mind and the LED may be dimmed, allowing you to adjust PPFD levels produced without losing efficiency.
This dynamic, highly efficient and low powered LED fixture configuration, with ten 100W 2.9 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.
Choose to run anything from a single light bar to the full 10 line-up at any intensity you need by simply adding or removing the desired amount using the fixtures’ innovative smart and easy, click-magnet design. The driver can also be detached from the fixture and used away from the fixture for your convenience.
 
 
Universal Control Systems Compatibility
ELS-LPC9 LED Fixtures can be fully controlled with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter  RJ to 0-10V control adaptor.
 
 
– Highest Market Fixture Efficacy 2.9 µmol/J
– High PPF output for high intensity 2925 µmol/s
– Lowest $/µmol
– World Class Diodes & Drivers
– Designed to produce utra-high PPFD for CO2 supplemented Grow Areas
– CO2 Supplemental: A ratio of 1:1 CO2 PPM should be added once a PPFD of 1000 µmol/s/m2 is exceeded
– New Clear Glue Technology on the LED Bars Protection Cover
– Optimized Full-Spectrum
– Detachable Driver
– Fully Dimmable
– External Control with Digital Controller
– Interchangeable Magnet LED Bars
– User Friendly & Easy Set-Up
– 5 Year Warranty